AT89C51RB2 IC解密

世纪芯科技提供AT89C51RB2解密服务，我们长期以技术研究和诚信优质的技术服务为目的，所有芯片解密、IC解密、单片机解密服务仅限合法用途，有AT89C51RB2解密需求者请直接与我们联系：

AT89C51RB2　Description

　 The AT89C51RB2/RC2 is a high-performance Flash version of the 80C51 8-bit microcontrollers.It contains a 16K or 32K Bytes Flash memory block for program and data.The Flash memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin.The AT89C51RB2/RC2 retains all features of the 80C52 with 256 Bytes of internal RAM, a 9-source 4-level interrupt controller and three timer/counters.

　　AT89C51RB2　Features

　　80C52 Compatible

　　– 8051 Pin and Instruction Compatible

　　– Four 8-bit I/O Ports

　　– Three 16-bit Timer/Counters

　　– 256 Bytes Scratch Pad RAM

　　– 9 Interrupt Sources with 4 Priority Levels

　　– Dual Data Pointer

　　Variable Length MOVX for Slow RAM/Peripherals

　　ISP (In-system Programming) Using Standard VCC Power Supply

　　Boot ROM Contains Low Level Flash Programming Routines and a Default Serial

　　Loader

　　High-speed Architecture

　　– 48 MHz in Standard Mode and Internal Code Execution (40 MHz for external code)

　　– 24 MHz in X2 Mode and internal code execution (20 MHz for external code)

　　– 16K/32K Bytes On-chip Flash Program/Data Memory

　　– Byte and Page (128 Bytes) Erase and Write

　　– 100K Write Cycles

　　On-chip 1024 Bytes Expanded RAM (XRAM)

　　– Software Selectable Size (0, 256, 512, 768, 1024 Bytes)

　　– 256 Bytes Selected at Reset for TS87C51RB2/RC2 Compatibility

　　Keyboard Interrupt Interface on Port P1

　　SPI Interface (Master/Slave Mode)

　　8-bit Clock Prescaler

　　Improved X2 Mode with Independent Selection for CPU and Each Peripheral

　　Programmable Counter Array 5 Channels

　　– High-speed Output

　　– Compare/Capture

　　– Pulse Width Modulator

　　– Watchdog Timer Capabilities

　　Asynchronous Port Reset

　　Full Duplex Enhanced UART

　　Dedicated Baud Rate Generator for UART

　　Low EMI (Inhibit ALE)

　　Hardware Watchdog Timer (One-time Enabled with Reset-out)

　　Power Control Modes

　　– Idle Mode

　　– Power-down Mode

　　– Power-off Flag

　　Power Supply:

　　– 2.7 to 3.6 (3V Version)

　　– 2.7 to 5.5V (5V Version)

　　Temperature Ranges: Commercial (0 to +70°C) and Industrial (-40°C to +85°C)

　　Packages: PDIL40, PLCC44, VQFP44